![LiquidInstruments-KnowledgeBase-Logo.png]](https://prm.liquidinstruments.com/hs-fs/hubfs/LiquidInstruments-KnowledgeBase-Logo.png?height=50&name=LiquidInstruments-KnowledgeBase-Logo.png){kind=logo}
Moku:Lab
General use of Moku:Lab
- How to turn on your Moku's WiFi access point
- How to connect Moku:Lab via USB in Windows
- How to connect to the access point of a Moku device?
- What is the main difference between the Moku Oscilloscope and the Data Logger instruments?
- How do I ensure that I have the latest instrument versions on my Moku?
- How does the PID control matrix work?
- Can you use multiple instruments simultaneously on Moku:Lab, for example Lock-in & AWG? Or PID & FIR Filter Builder?
- What are my options for triggered burst mode?
- Generating a pulse wave using Pymoku
- MATLAB: Frequency Response Analyzer (plotting)
- Probe selection for Moku:Lab
- Moku LED color status
- Python: Data Logger (basic)
- Moku:Lab Windows driver security
- Getting started using MATLAB with Moku:Lab
- How does Moku:Lab calculate the Power Spectral Density?
- 100:1 High Voltage probe
- Moku:Lab shows up as COM port instead of RNDIS
- How can I upload custom waveforms from the iPad?
- All of my lab computers run Windows. Will I need to change them all to Mac OS?
- Do you need internet access to use your Moku?
- How much does Moku:Lab cost?
- Can Moku:Lab perform phase unwrapping demodulation
- What file formats does the Moku:Lab Arbitrary Waveform Generator support ?
- How do I update my Moku’s firmware?
- How to turn on Moku:Lab's WiFi access point
- What file formats are supported in the Moku:Lab Data Logger?
- Spectrum Analyzer units of measure
- How to factory reset Moku:Lab
- How to change the name of a Moku:Lab?
- I just upgraded my Moku:Lab with a new instrument, how do I install it?
Getting Started with Moku:Lab
- I just upgraded my Moku with a new instrument, how do I install it?
- What do all the ports do on the Moku:Lab?
- How to connect my Moku:Lab to a WiFi network for the first time
- How do I get started with Moku:Lab instruments
- How to find the serial number of the Moku:Lab?
- How to connect Moku:Lab to an existing network via Ethernet
- How do I turn on Moku:Lab?
Using Moku:Lab
- How to connect my Moku:Lab to a Windows PC through direct Ethernet cable
- How to export measured data from Moku:Lab?
- How much can you control with the APIs?
- Moku:Lab contains an FPGA. Can I access the FPGA to execute my own code?
- Loading recorded data in Excel
- How do I find Moku:Lab's IP address?
- Can you add more channels?
- WiFi is not permitted in our lab. How can I use Moku:Lab and iPad
- Can I disable firmware updates ?
- All of my lab computers run Windows. Will I need to change them all to Mac OS?
- Using Moku:Lab with static IP address
- Can you stream data to the computer for real-time calculations?
- Can I use Moku:Lab via VPN?
- Remote access to Moku:Lab data logs
- Can I connect to a Moku:Lab directly by IP address?
- Do you need internet access to use Moku:Lab?
- How do I locate my Moku in a lab with many Mokus?
- Can you use multiple instruments simultaneously, for example Lock-in & AWG? Or PID & FIR Filter Builder?
- I don't have an iPad. Can I still use Moku:Lab?
Hardware
- IEC/ISO 17025 calibration: which instruments does it cover?
- Moku:Lab is hot
- Is Moku:Lab calibrated?
- Can I log to the SD card ?
- Does Moku:Lab reference to earth ground or it has floating ground?
- Moku:Lab brochure and full specifications
- How much current can Moku:Lab source and sink?
- What is ISO/IEC 17025?
- What if Moku:Lab fails to start?
- Are the Moku:Labs protected from over voltage ?
- Can I adjust amplitude of Moku:Labs output reference clock ?
- Power supply for Moku:Lab
- Moku:Lab LED color status
- How do I update Moku:Lab’s firmware?
- How to connect to Moku:Lab via USB and iPad